Welcome to the KartLift.com Online Store

Pro KartLift
The Pro KartLift is the perfect solution for the karter who wants both the convenience of a one person stand, and the higher quality options such as a tool shelf and upgraded one piece wheels and extra capacity. The aluminum appearing silver powder coat is durable and great looking. The foot lever provides increased leverage and allows an operator weighing up to 50 lbs. less than the kart to still be able to use the stand successfully.

The Pro KartLift uses compressed gas shocks to assist in lifting the kart into position. The Basic is capable of handling a 240 lb. kart, as long as the stand operator weighs no more than 50 lbs. less than the kart.

Cost: $575.00 + $45.00 Shipping

WinchLift
The WinchLift LT uses a powerful, high quality electric winch to provide the lifting power. Simply add your U1 type lawnmower battery and you've got yourself a machine capable of lifting karts weighing up to 300 lbs. with push button ease. The powdercoated frame is fabricated from full 1.25" steel tubing. A 2" wide nylon strap is used in place of the typical winch cable and provides a reliable, safe, lift. The high quality 10" tires on one-piece steel rims have long life bearings that won't wear out. Eight inch pneumatic tires on precision swivel casters mounted on the rear of the stand provide rough terrain capabilities and turning ease. The large rear handle provides a comfortable platform from which to push your kart, as well as ample room to adjust the hooks to the width of your rear bumper. If your bumper doesn't fit one of the 2 pre-drilled positions, simply drill another set of holes and move the hooks to the new position.

The WinchLift HD uses the same design and features as the LT version, but boasts an increased wall thickness in high stress areas and an increased lifting capacity of #350 lbs.

All WinchLifts now come with a free diamond plate aluminum tool/starter shelf.

Cost: LT - $600 + $50 Shipping
Cost: HD - $750 + $50 Shipping

WinchStacker
The Winch Stacker (pat. Pending) is a combination powered lift stand, and double stacker. The base of the stacker is a WinchLift LT or HD. On top of the folded WinchLift, goes the lower section of the Stacker, which creates a platform to stack a kart on. Then the top section of the Stacker is place on top of the lower frame, just as a traditional stacker stand is, thus creating an upper platform for kart storage and transport.

The Winch Stacker can be used for transporting and storing two karts and a lifting kart stand in one space the size of a single kart. This can be invaluable when hauling multiple karts and stands in a compact trailer. The Winch Stacker is available in all KartLift standard colors and retails for $800.00 complete (+$100 shipping) or $225 (+$50 shipping) for the top sections only, to fit on your WinchLift. Like all KartLift kart stands, the Winch Stacker ships via FedEx Ground.

Euro Stand
New from KartLift, the Euro Stand provides simplicity and durability for users. The Euro Stand was inspired by traditional European kart "trolleys" but designed with a wider stance, offering much improved stability over it's narrow European counterparts. The Euro Stand's durable polyethylene floor tray provides plenty of space for tools, tires, starters, gas jugs or whatever else you need to bring to the grid or cart around the paddock. Rubber-wrapped uprights ensure your kart stays in place on the stand. Tough terrain is easily tackled with the handle attached to the front upright. This allows the user to lift the front casters off the ground for better maneuverability in rough terrain and crowded paddocks. The Euro Stand also disassembles for transport by simply removing a couple fasteners and removing the uprights. The stands are also stackable to maximize the storage space in your trailer.

Cost: $250.00 + $35.00 Shipping

Euro Deluxe Stand
The Euro Deluxe stand is an "American-ized" version of the high end European kart trolleys. The Euro Deluxe has big wheels and casters for easy navigation, a large aluminum tool shelf, and fully adjustable height crossbars for the kart. The arms also remove and lay fasten down for easy storage and transport. Available only in silver.

Cost: $325.00 + $40.00 Shipping

BigFoot Stand

Cost: $215 unfinished + $50 Shipping
Cost: $250 powdercoated + $50 Shipping

Double Stacker Stand

30" - 2 Cycle Version
44.5" - 4 Cycle Version

Cost: $275 unfinished + $50 Shipping
Cost: $315 powdercoated + $50 Shipping

Upright Stand
Cost: $130 unfinished + $40 Shipping

RPS Hooks
The Rear Protection System (RPS) Hooks allow the Pro KartLift, Electric KartLift, and WinchLifts to pickup karts equipped with large plastic bumpers. Fits KG, CRG, Righetti Ridolphi (mods needed for Pro installation), Freeline (Birel), TonyKart, and many others. May require some modifications to mounting points to fit each specific application. Older models require drilling. Includes instructions and necessary hardware.

Cost: $55/Set + $10 Shipping

Skid Plate Kit
Add these high density polyethylene skid plates to your kart and give your chassis protection from the many hazards on the track. These plates will prolong your chassis life and reduce or prevent flat spotting of the waist rails and keep your frame looking and working like new. This kit will not affect kart handling like larger ones. Includes relief to fit new single tab OTK karts.

Universal fit on most karts, including cadets, kidkarts. Drilling of mounting holes in floorpan may be required.

Kit includes 3 machined skid plates and necessary mounting fasteners.

Cost: $55 + $6 S & H

Click Here for installation instructions.

Hitch Carrier
The Hitch Carrier by KartLift provides a safe and convenient method for transporting your kart stand using a standard 2" receiver hitch on the back of your vehicle. The Hitch Carrier features integrated tie down loops for use with your bungee cords or ratchet straps. Rubber coated hooks protect the finish on your stand as well. The hooks are spaced 14" center to center and the overall height of the Carrier is 40" (the hooks can be moved). Fits Pro KartLift, Electric KartLift, Bigfoot Scissors stands, and more. The height of your hitch and clearance below will determine whether or not your kart stand will fit, so please verify the fitment prior to ordering. Available in black, blue, or red. Some assembly required.

Cost: $75 + $15 Shipping